建筑五金CE認證簡介

　　建筑五金CE認證屬于歐盟建材CE認證的范疇，需要根據最新的建材CPR法規做檢測和認證，建材CPR認證（305/2011/EU-CPR）是于2013年7月起開始強制實施的，根據不同的建材五金種類，需要相應的標準做檢測和認證。

建筑五金CE認證標準

　　EN179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods

　　建筑五金,緊急出口設備經營杠桿手柄或推板,用于對逃生路線-要求和測試方法

　　EN1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods

　　建筑五金,恐慌出口設備的運作的單杠,用于對逃生路線-要求和測試方法

　　EN1154:1996 Building hardware - Controlled door closing devices - Requirements and test methods

　　建筑五金,控制門關閉設備,要求和測試方法

　　EN1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods

　　建筑五金,電動開啟把柄設備-要求擺門和測試方法

　　EN1158:1997  Building hardware - Door coordinator devices - Requirements and test methods

　　建筑五金-門-需求和測試設備的協調方法

　　EN1935:2002  Building hardware - Single-axis hinges - Requirements and test methods

　　建筑五金-單軸鉸鏈-要求和測試方法

　　EN12209:2003  Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods

　　建筑五金-鎖和鎖存-機械操作的鎖,鎖存和鎖定板-要求和測試方法

　　EN14846:2008  Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods

　　建筑五金-鎖和鎖存-機電由操作鎖和引人注目的板塊-要求和測試方法

建筑五金CE認證辦理

　　沃證國際檢測認證中心是歐盟授權的CE認證服務機構，可以協助辦理建筑五金CE認證，資深工程師解讀CE認證，歡迎來電咨詢:021-5108-8618